Table of Contents
Advertisement
Procedure:
RE-INSTALLING DISK DRIVE
11
Re-Installing Disk Drive 1 in HORIZON
1.
Slice Drive #1 half-way into the HORIZON.
2.
Reconnect the signal cable to connector Jl at the bottom of
the Drive
#1
circuit board.
3.
Reconnect the DC power cable to connector J2 at the top of
the Drive
#1
circuit board.
--- ------------------------------_.
4.
Slice the drive completely into the HORIZON, positioning it
over the access holes in the bottom of the HORIZON frame.
5.
Insert the original screws removec from the drive and tighten
them securely.
-------~------------
6.
Set the HORIZON back on its base.
CAUTION
Retrieve any screws that are dropped into the HORIZON. A
loose screw could slip under the motherboard and cause a
short circuit.
.I"
HORIZON Hard Disk Installation Guide
11
Advertisement
Table of Contents
