Table of Contents
Advertisement
MOUNTING ARD
CONNECTING THB HARD DISK DRIVE
(cont. )
Procedure:
Mounting and Connecting the Hard Disk Drive
/
7.
Plug the 34-connector cable onto the large keyed edge
connector at the top of the hard disk circuit board.
Align
the connectors properly before pressing the cable connector
into place.
large keyed
edge connector
red strip
8.
Check that the pre-folded ribbon cables lie flat, without
twists.
Check that the DC power supply cable runs under the
central metal partition of the HORIZON.
9.
Plug the power supply cable into the white connector on the
top rear of the hard disk circuit board.
10. Fold the signal cable that was attached to Drive #2 back out
of the way of the hard disk drive.
11. Push the hard disk drive the rest of the way into the HORIZON
cabinet.
- - - - )
20
HORIZON Hard Disk Installation Guide
Advertisement
Table of Contents
