Sony Ericsson T68ie White Paper page 64

Dimension
Interfaces to external
devices supported by the
handset and available for
a GPRS link
Downlink data rate
Uplink data rate
Mode of operation
R Reference point
IP connectivity
Application
QoS
PDP context
SIM
AT commands supported
Support in the T68i
IrDA, RS-232, AT commands. IrDA,
Datarate=SIR & MIR RS232,
autobaud, max 460kbit/s
Bluetooth, v1.0B+Critical errata,
Certified and listed Supported
Bluetooth profiles: DUN, FAX,
Headset, Synch, Object push
Up to 64,200 bps for packet data communication, using 3 time slots in
coding scheme CS-4
Up to 21,400 bps for packet data communication, using 1 time slot in
coding scheme CS-4
Class B and Class C modes of operation supported. It is possible for the
user to choose if the Circuit Switched services should be favoured.
Physical layer: Support of RS232
PPP is supported as L2 layer in the R reference point
Authentication algorithms PAP, CHAP supported
PDP type IP is supported
IP termination in mobile or TE (laptop, PDA) supported
WAP over GPRS supported (UDP/IP and GPRS-SMS)
SMS over GPRS (SMS-MT, SMS-MO) supported
QoS negotiation supported. Default requested QoS sent by the handset at
PDP context activation is reliability Class 3. Peak/Mean/Delay/Precedence
Class: subscribed (1,2,3).
• Precedence class supported (1,2,3)
• Reliability class 1-5 supported
• Delay classes supported (1,2,3,4)
• Mean and peak throughput rate limited by multislot class 4 and CS-
4
10 PDP context descriptions stored in mobile
PDP context description is edited via application in mobile, AT-command
or via OTA
Simultaneous PDP contexts not supported
Network requested PDP context not supported
GPRS aware, as well as non GPRS aware SIMs are supported
• AT+CGDCONT - DEFINE
PDP CONTEXT
• AT+CGQREQ - Quality of
Service Profile
(REQUESTED)
• AT+CGQMIN - Quality of
Service Profile (Minimum
Acceptable)
• AT+CGATT - PACKET
DOMAIN SERVICE ATTACH
OR DETACH
White Paper, April 2002
• AT+CGACT - PDP CONTEXT
ACTIVATE OR DEACTIVATE
• AT+CGDATA - ENT
T68i
64