Using The Wap Browser - Sony Ericsson T62u User Manual

Settings for DialUp Connection
– the phone number of your Internet
Phone Number
service provider.
User id, Password, Passwd. request
above.
– select the speed you want for
Data rate
the connection.
– select analog or ISDN connection.
Dial type
If you want to change access type, you have to create
a new data account and select the access type you want
to use.
Data Settings
If you have selected GPRS as the access type, the
Preferred service should be set to
may then appear in the display telling you that GPRS is
within range. See "Icons" on page 88. If you have
selected
DialUp Conn.
select as the preferred service. This setting is
DialUp Only
valid for all data accounts.
72 WAP
. Same as for GPRS
GPRS&DialUp
as the access type, you should
Selecting a preferred service
1 Scroll to
2 Make your selection.
To see the status of GPRS coverage and
Note!
connection, press the upper or lower side
volume key from standby to enter the Status
menu and then scroll to GPRS.
Data Counters
To check how much data you have sent and received,
using GPRS, scroll to
or
Session

Using the WAP browser

. An icon
Starting to browse
1 First select the WAP profile you want to use.
2 Scroll to
3 Select one of the following (dependent upon your
service provider):
• Open your homepage.
Settings, Data comm., Preferred Srvc.
Call Info, Data Counters, Last
Total Data.
.
Browser