Actual Signals And Parameters; Chapter Overview; Terms And Abbreviations - ABB ACS800 Firmware Manual

Actual signals and parameters

Chapter overview

The chapter describes the actual signals and parameters and gives the fieldbus
equivalent values for each signal/parameter. More data is given in chapter
data: actual signals and

Terms and abbreviations

Term
Absolute Maximum
Frequency
Absolute Maximum
Speed
Actual signal
FbEq
Parameter
parameters.
Definition
Value of 20.08, or 20.07 if the absolute value of the minimum limit is
greater than the maximum limit.
Value of parameter 20.02, or
limit is higher than the maximum limit.
Signal measured or calculated by the drive. You can monitor the signal
but no user settings are possible.
Fieldbus equivalent: The scaling between the value shown on the panel
and the integer used in serial communication.
A user-adjustable operation instruction of the drive.
20.01 if the absolute value of the minimum
Actual signals and parameters
151
Additional