The sensor features wide operating range, compact size, and easy installation. The 86004-SDI measures wind speed and direction based on the transit time of ultrasonic pulses between three transducers. Measurement results are available in either polar (speed and direction) or Cartesian (u and v) format using standard SDI-12 commands.
Commands to accommodate manufacturer settings and other Model 86004-SDI uses the SDI-12 (v1.3) serial communication functions. Extended Commands for the 86004-SDI and the sensor protocol to initiate wind measurements and set sensor operation response are listed below. Where two responses are shown, one parameters.
A copy of the warranty policy is degrees x 10 and may be positive or negative. Wind direction is may be obtained from R. M. Young Company. always re-scaled to a 0-360 range after offset is applied. The default value is 00000.
Page 5
275 mm +U m/s "WIND FROM EAST" POST INSERTION 80 mm CARTESIAN 26 mm (U, V) ORIENTATION RING R. M. YOUNG COMPANY 2801 Aero Park Drive , Traverse City, Michigan 49686 U.S.A. 86004-SDI-90(D) Page 4 TEL (231) 946-3980 FAX (231) 946-4772...