Programs Screen - Dometic Interact Operation Manual

Dometic Interact
4.1.9.15 Time Format Option
Use the Time Format toggle button to set your desired
time format (in 12-hour or 24-hour formats).
The side of the toggle button that holds the dot indicates
the current selection.

4.1.10 Programs Screen

The Programs screen allows you to monitor, control, and
configure the programs for the system.
39 Programs Screen
The Programs screen is the main screen from which
configured programs can be monitored, enabled, or
disabled. You can complete the following actions from
this screen:
• Tap the exit (x) icon to close the Programs screen and
return to the previous screen.
• Tap the plus (+) icon to open the New Programs
window and create a new program.
• Tap the pencil icon to open the Program Settings
window.
• Tap any preexisting program button to start running
the program, and a pop-up window appears to
indicate that the program is running.
40 Running Program Notification
EN
• Tap the STOP button to end the program.
Refer to the sections that follow for more information
about configuring new programs and editing existing
programs.
4.1.10.1 New Programs Window
The New Programs window allows you to configure a
new program, which will be listed on the main Programs
screen.
41 New Programs Window
From this window, you can configure or adjust the
following functions:
• Locks: Use the available toggle buttons and check
boxes in the Locks section to select the options that
you want to control with the new program.
• Electrical: Use the available toggle buttons and check
boxes in the Electrical section to select the options that
you want to control with the new program.
• Back: Tap this button to cancel your changes and
return to the main Programs screen.
• Next: Tap this button to save your changes and open
the Naming Program window.
Operation
21