Dometic Interact Operation Manual page 18

Operation
4.1.9.4 Start Page Section
Use this section of the Settings screen to set the default
screen that will display when you are within sensing range
of the proximity sensor:
1. Tap the EDIT button to open the Start Page window.
30 Start Page Window
2. Use the tumbler to choose from a list of all available
screens that you can set as your starting page.
3. Tap the OK button to save your selection and return
to the Settings screen.
4.1.9.5 Default Room Section
Use this section of the Settings screen to set the default
room that appears on the Main Navigation screen:
1. Tap the EDIT button to open the Default Room
window.
31 Default Room Window
18
2. Choose from the list of available rooms (Bedroom,
Entry, or Bathroom).
3. Tap the OK button to save your selection and return
to the Settings screen.
4.1.9.6 Standby Screen Section
Use this section of the Settings screen to set the screen
that should appear when you are outside of the sensing
range of the proximity sensor:
1. Tap the EDIT button to open the Standby Screen
window.
32 Standby Screen Window
2. Choose from the list of available display options:
– Dimmed: The screen dims to 30% brightness until
the proximity sensor senses movement.
– Clock: The screen displays the Clock screen until
the proximity sensor senses movement. Refer to the
Clock Screen section for more information.
– Go To Sleep: The screen goes black until the
proximity sensor senses movement.
3. Tap the OK button to save your selection and return
to the Settings screen.
When you move into the sensing range of the
I
proximity sensor, the display will show the start
page that you selected.
Dometic Interact
EN