Dometic Interact Operation Manual page 14

Operation
16 Alarm Notification
From any display, you can tap the SNOOZE button on the
pop-up window to delay the alarm for five minutes, or tap
the STOP button to stop the alarm.
The following sections provide more information about
configuring new alarms and editing existing alarms.
4.1.8.1 Alarm Edit Window
The Alarm Edit window allows you to configure or alter
the alarms listed on the Alarms screen.
17 Alarm Edit Window
14
From this window, you can configure or adjust the
following functions:
• Alarm Name: The name of the alarm displays. Tap the
alarm name to open the Naming window.
• Time Selection: The set time for the alarm displays.
Tap the EDIT button to open the Pop-Up Time window.
• Repeat: Use this toggle button to enable or disable a
repeating alarm based on the days that you choose.
When Repeat mode is enabled, it repeats the alarms
for the days selected.
• Days: Tap the desired days (represented by single
letters) to specify the days on which the alarm will
repeat.
• Sound: The specified sound for the alarm displays.
Tap the EDIT button to open the Sound Decision
window.
• Program: The specified program for the alarm is
displayed. Tap the EDIT button to open the Program
Decision window.
• Delete: Tap this button to delete the alarm from the list
of alarms displayed on the Alarms screen.
4.1.8.2 Pop-Up Time Window
The Pop-up Time window appears when you tap the Time
Selection Edit button from the Alarm Edit window.
18 Pop-Up Time Window
Dometic Interact
EN