Dometic Interact Operation Manual page 20

Table of Contents

Advertisement

Available languages

Available languages

Operation
– Auto: The furnace and/or heat pump will run when
the coach requires heating. The furnace will only
turn on if the temperature drops below the set point.
The furnace is used as a secondary boost for the heat
pump if the temperature gets cold enough.
– Furnace: Only the furnace runs when the coach
requires heating.
3. Tap the OK button to save your selection and return
to the Settings screen.
4.1.9.9 Temperature System Option
Use the Temperature System toggle button to set your
desired temperature readings (in degrees Centigrade or
Fahrenheit).
The side of the toggle button that holds the dot indicates
the current selection.
4.1.9.10 Language Section
Use this section of the Settings screen to set the desired
language for all screens on the control:
1. Tap the EDIT button to open the Language window.
37 Language Window
2. Choose from the list of available languages (French,
English, or Spanish).
20
3. Tap the OK button, and a pop-up message appears.
38 Language Change Confirmation
4. Tap the YES button to save your selection and return
to the Settings screen.
4.1.9.11 Brightness Mode Option
Use the Brightness Mode toggle button to choose
between Auto (A) or Manual (M) adjustment modes:
• When the auto option is selected, the brightness is
adjusted according to the ambient light sensor values.
• When the manual option is selected, you can adjust the
screen brightness manually.
4.1.9.12 Screen Brightness Option
Use the Screen Brightness slider to manually set your
desired screen brightness level (shown as a percentage
of full intensity).
In order to set the screen brightness, the manual
brightness mode must be selected.
4.1.9.13 Proximity Sensitivity Option
Use the Proximity Sensitivity slider to set your desired
proximity sensor sensitivity level.
The number 1 represents the lowest sensitivity level, and
10 represents the highest sensitivity level.
4.1.9.14 Audio Level Option
Use the Audio Level slider to set your desired audio level
intensity for the control (shown as a percentage of full
intensity).
Dometic Interact
EN

Advertisement

Table of Contents
loading

Table of Contents