Download  Print this page

Pioneer DVR-RT500-S/UXTLCA Training Manual page 45

Vcr & dvd recorder combo
Hide thumbs

Advertisement

2. REMOVAL OF VCR DECK PARTS
2-1: TOP BRACKET (Refer to Fig. 2-1)
1. Extend the 2 supports 1.
2. Slide the 2 supports 2 and remove the Top Bracket.
NOTE
1. After the installation of the Top Bracket, bend the
support 1 so that the Top Bracket is fixed.
1
Top Bracket
2
Main Chassis
2-2: CASSETTE HOLDER ASSY (Refer to Fig. 2-2)
1. Move the Cassette Holder Assy to the front side.
2. Push the Locker R to remove the Cassette Side R.
3. Remove the Cassette Side L.
Main Chassis
Link Unit
Cassette Side L
2-3: CASSETTE SIDE L/R (Refer to Fig. 2-3-A)
1. Remove the Locker Spring.
2. Unlock the 4 supports 1 and then remove the Cassette
Side L/R.
3. Unlock the support 2 and then remove the Locker R.
Locker Spring
1
1
2
Locker R
Cassette Side R
Top Bracket
1
2
Main Chassis
Fig. 2-1
Cassette Side R
Locker R
Main Chassis
Fig. 2-2
Cassette Holder
1
1
Cassette Side L
Fig. 2-3-A
NOTE:
1. In case of the Locker R installation, check if the one
position of Fig.2-3-B are correctly locked.
2. When you install the Cassette Side R, be sure to move
the Locker R after installing.
Locker R
Cassette Side R
2-4: LINK UNIT (Refer to Fig. 2-4)
1. Set the Link Unit to the Eject position.
2. Unlock the support 1.
3. Remove the (A) side of the Link Unit first, then remove
the (B) side.
Main Chassis
Link Unit
(A)
1
2-5: LINK LEVER/FLAP LEVER (Refer to Fig. 2-5)
1. Extend the support 1.
2. Remove the Link Lever.
3. Remove the Flap Lever.
1
45
Check it this position
is locked.
Fig. 2-3-B
(B)
Link Unit
Main Chassis
Fig. 2-4
Flap Lever
Link Lever
Fig. 2-5

Advertisement

loading

  Related Manuals for Pioneer DVR-RT500-S/UXTLCA

This manual is also suitable for:

Dvr-rt300-s/uxtlca