Pioneer DVR-RT500-S/UXTLCA Training Manual page 24

ADJUSTMENT
SERVICING FIXTURES AND TOOLS
(For 4 heads model)
VHS Alignment Tape
3
GGV1183 (VN S-LI6 H)
1
3
GGV1184 (VN S-X6 )
1
3
GGV1185 (VN E-LI6 H)
2
GGF1511 Master Plane
Part No.
GGV1183 VHS Alignment Tape
GGV1184 VHS Alignment Tape
GGV1185 VHS Alignment Tape
GGF1506 Adapter
GGF1507 Dial Torque Gauge (10~90 gf•cm)
GGF1508 Dial Torque Gauge (60~600 gf•cm)
GGF1509 Post Adjustment Screwdriver
GGF1510 X Value Adjustment Screwdriver
GGF1511 Master Plane
GGF1512 Reel Disk Height Adjustment Jig
GGV1186 Torque Tape (VHT-063)
PREPARATION FOR SERVICING
1. While pressing the CH DOWN button on the set for more than 2 seconds, press the POWER button on the set
simultaneously at the Power OFF. Although the DVD is connected, the DVD mode cannot be selected.
2. Press both CH UP button on the set and the REC button on the set for more than 2 seconds.
(The BOT, EOT, and the Reel Sensor do not work and the VCR deck can be operated without a cassette tape.)
3. In case of using a cassette tape, press the EJECT button to insert or eject a cassette tape.
Turn on the power and re-check the cable before checking the trouble points.
When you servicing with connection of DVD, perform the operations above step 2 to step 3.
GGF1506 Adapter
GGF1507 Dial Torque Gauge
(10~90 gf•cm)
GGF1508 (60~600 gf•cm)
GGF1512 Reel Disk Height
Adjustment Jig
Parts Name
Hi-Fi Audio (For 4 heads model)
X Value Adjustment (For 4 heads model)
EP Monoscope, 6 kHz (For 4 heads model)
VSR Torque, Brake Torque (S Reel/T Reel Assy)
Brake Torque (T Reel Assy)
VSR Torque, Brake Torque (S Reel)
Guide Roller Adjustment
X Value Adjustment
Reel Disk Heifht Adjustment
Reel Disk Heifht Adjustment
Playback Torque, Back Tension Torque During Playback
24
GGF1509 Post Adjustment
Screwdriver
Part No. SV-TG0-030-000 (small)
GGV1186 Torque Tape
(VHT-063)
Remarks
GGF1510 X Value Adjustment
Screwdriver