Processor Memory Features; Feature Codes For System Memory; Power Features; Power Cords - IBM DS8882F Introduction And Planning Manual

Processor memory features

These features specify the amount of memory that you need depending on the
processors in the storage system.

Feature codes for system memory

Use these feature codes to order system memory for the DS8882F.
Note: Memory is not the same as cache. The amount of cache is less than the
amount of available memory. See the DS8000 Storage Management GUI.

Power features

You must specify the power features to include on your storage system.

Power cords

A pair of power cords (also known as power cables) is required.
Feature codes for power cords
Use these feature codes to order power cords. Ensure that you meet the
requirements for each power cord and connector type that you order.
70
DS8882F Introduction and Planning Guide
Table 24. Feature codes for system memory
Feature code Description
1
4233 64 GB system memory
1
4234 128 GB system memory
1
4235 256 GB system memory
Notes:
1. Feature codes 4233, 4234, and 4235 require 6-core processor license feature code 4421.
Table 25. Feature codes for power cords
Feature code Power cord facility plug type
1021 Single-phase power cord, 250 V, 20 A
NEMA L6-20P
1022 Single-phase power cord, 250 V, 16 A
CEE 7 VII
Model
983 (6-core)
983 (6-core)
983 (6-core)
Plug diagram
E
E
N L