Appendix E. Compliance Standards - IBM DS8882F Introduction And Planning Manual

Appendix E. Compliance standards

This product was designed, tested, manufactured, and certified for safe operation.
It complies with IEC 60950-1 and/or IEC 62368-1 and where required, to relevant
national differences/deviations (NDs) to these IEC base standards. This includes,
but is not limited to: EN (European Norms including all Amendments under the
Low Voltage Directive), UL/CSA (North America bi-national harmonized and
marked per accredited NRTL agency listings), and other such derivative
certifications according to corporate determinations and latest regional publication
compliance standardized requirements.
Regulatory Model ID (RMID, for control system base platform): AP2 / DS8882F
© Copyright IBM Corp. 2018
AP2 indicates the 2U Management Enclosure chassis only for regulatory
component identity within the higher level integrated solution system
being offered under the identity of DS8882F. As no rack or common cabinet
enclosure is offered with this storage system of components, the MTM
underneath this is a variable Print On Demand (Pod) based upon any
given ordered integrated solution system, indicating it's service identity).
Note: Relevant Machine Type - Models (MT-Ms) may also be used to
supplement identification (ID) for worldwide (WW) co-compliance filings
or registrations with regulatory bodies.
129