Getting Started; Navigating Through The Menus; Associating The Remote Control To The Electronic Box - Parrot MKi9100 User Manual

Hide thumbs Also See for MKi9100:

Table of Contents

WARNING

: If the remote control doesn't seem to be associated to the electronic box while using the Parrot

MKi for the first time, refer to the

If the remote control doesn't seem to be associated to the electronic box while using the Parrot MKi9200:

Note

: If you are unsuccessful on the first attempt, power off the unit until you see the "Goodbye" message,

power it back on, and repeat the process.

Associating the remote control to the electronic box

Parrot MKi9100 – User guide

After verifying the CR2032 battery is properly

inserted in the remote unit, press and hold the

and

buttons then press the

several times. This has to be done when you

see the "Parrot MKi9200" Logo on the display

screen.

Within 1 to 2 seconds, you should then see a

"Pairing Remote Control" message displayed on

the screen. At that time, you can release the

buttons and the remote should then be paired

with the kit and the message will go away. You

can verify remote operation by navigating

through the menus.

Getting

started

section.

button

Table of Contents