DISASSEMBLY
•
Disassemble in order of the arrow in the following figure.
•
In the case of the re-assembling, assemble it in order of the reverse of the following flow.
•
In the case of the re-assembling, observe "attention of assembling".
•
If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
FRONT PANEL ASSY
Refer to "DISASSEMBLY
1. FRONT PANEL ASSY"
and "EXPLODED VIEW"
POWER SW PWB
(Ref. No. of EXPLODED VIEW : C1)
HEADPHONE PWB
(Ref. No. of EXPLODED VIEW : C2)
FRONT PWB
(Ref. No. of EXPLODED VIEW : C3)
VOLUME PWB
(Ref. No. of EXPLODED VIEW : C4)
TOP COVER
DIGTAL PWB
Refer to "DISASSEMBLY
2. DIGTAL ASSY"
and "EXPLODED VIEW"
DIGTAL PWB
(Ref. No. of EXPLODED VIEW : C10)
ASSY
MAIN
Refer to "DISASSEMBLY
ASSY
5. MAIN
"
and "EXPLODED VIEW"
MAIN PWB ASSY
(Ref. No. of EXPLODED VIEW : C7)
11
STANDBY PWB
Refer to "DISASSEMBLY
3. STANDBY PWB"
and "EXPLODED VIEW"
STANDBY PWB
(Ref. No. of EXPLODED VIEW : C6)
POWER TRANS
Refer to "DISASSEMBLY
4. POWER TRANS"
and "EXPLODED VIEW"
POWER TRANS
(Ref. No. of EXPLODED VIEW : C5)