Daewoo Bus BS Series Owner's Manual page 257

1st 2nd
Malfunction Part
NO. NO.
15 1
15 2
15 3
15 4
15 5
15 6
15 7
ECU Internal Fault
15 8
15 9
15 10
15 11
15
15
1
16
2
16
3
16
Power Supply
16 4
16 9
16 10
Faulty internal microprocessor. Faulty memory erased.
Change ECU if this fault code constantly appears.
Faulty ECU data. Faulty memory erased.
Change ECU if this fault code constantly appears.
Faulty internal microprocessor.
Faulty memory erased.
Change ECU if this fault code constantly appears.
Faulty ECU system compostion. Faulty memory erased.
Change ECU if this fault code constantly appears.
Interior of ECU is not converted to Relay. Faulty memory erased.
Change ECU if this fault code constantly appears.
ECU' s inner Relay permanent switch is activated. Faulty memory is erased.
Change ECU if this fault code constantly appears.
ABS Software does not match with the hardware.
Check the system installation and ECU composition.
Battery supply - temporary high voltage. Generator/Voltage check.
Battery supply - temporary low voltage. Check the low voltage battery condition and shutdown of ABS control.
Battery supply - Faulty wiring.
Supplied voltage - power line noise. Temporary power line noise.
Ignition supply - temporary high voltage.
Ignition supply - temporary low voltage. Check the battery condition and shutdown.
Fault Details
Check the condition of Generator/voltage.
7-67
FAULTY DIAGNOSIS