Operation Of Key Switch - Daewoo Bus BS Series Owner's Manual

CAUTION
・ Holding the key in the starting
position (START) for longer than 10
seconds due to a delay in starting
of the engine, may result in a
excess current which causes
damages to the motor. Therefore,
when a delay in starting of the
engine occurs, turn the key to its
original position and restart the
engine after waiting for about a
minute. If the engine fails to start
within 2~3 times, inspect your
vehicle.
・ Leaving the battery main switch on
for a long period without starting
the engine, may
discharged battery. Do not leave
the battery main switch on for a
long period when the engine is not
running.
WARNING
・
Turning the key to the "LOCK"
position or pulling out the key
during vehicle operation may result
in an unexpected accident. Never
turn the key to the "LOCK" position
or pull out the key while the vehicle
is in operation.
・
Start the engine after checking if
inspection indications for Engine,
ABS/ASR, intarder brake and
eletrical devices are turned off. The
devices may malfunction if you start
the engine while devices are being
inspected.
REFERENCE
cause a
Check list when start-up malfunctions
- Battery Condition
- Battery Relay
- Battery Main Fuse
- Starter Fuse
- Fuel Quantity
- Starter Motor

Operation of Key Switch

• • LOCK : Insert or pull out the key in
• • ACC : Power is supplied to the audio
• • ON : Power is supplied to all
• • START : Turn the key to this position
4-9
START-UP & DRIVING
this position.
system, digital clock, and other
devices when the key is in this
position.
electronic devices in the vehicle
when the key is in this position.
when starting the engine, and let it
go when the engine srarts so that it
automatically returns to the "ON"
position.
OM-B168