Sony SLV-SE850G Operating Instructions Manual page 80

6
To start editing, press the X (pause) buttons on your VCR and the stereo system
(or other VCR) at the same time.
When the counter reaches "0H00M00S," audio dubbing stops automatically.
To stop while editing
Press x (stop) on this VCR and the stereo system (or other VCR).
Note
• After you use this feature, the audio in playback mode is automatically set to monaural.
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the AUDIO OPTIONS menu (see page 77). Use this
feature to listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not function. Note that by mixing both
hi-fi and normal audio, some echo may appear.
Remember to reset AUDIO MIX to OFF after playing the tape.
Note
• If you eject the tape, AUDIO MIX is automatically set to OFF.
80
Audio dubbing