Table of Contents
Advertisement
3
PLAY
OK
CLEAR
4
PLAY
OK
CLEAR
5
MENU
52
Recording TV programmes using the VIDEO Plus + system
Press OK.
The date, start and stop times, programme
position, tape speed, and VPS/PDC setting
appear on the TV screen.
If "– –" appears in the "PROG."
(programme) column (this may happen for
local broadcasts), you have to set the
appropriate programme position manually.
• To select a terrestrial channel.
Press M/m to select the desired programme position.
• To select a video source from the LINE-1 (TV) or LINE-3 IN connector,
or the LINE-2 IN jacks.
Press INPUT SELECT to select the desired video source.
• To select a satellite channel
Press STB. "STB ---" appears in the PROG position on the TV screen.
Then enter a three digit channel number with the number buttons.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
For details about the VPS/PDC function, see "Timer recording with VPS/
PDC signals" on page 53.
If the information is incorrect, press CLEAR to cancel the setting.
If you want to change the date, tape speed,
and the VPS/PDC function setting:
1 Press </, to highlight the item you
want to change.
2 Press M/m to reset it.
• To record the same programme every
day or the same day every week, see
"Daily/weekly recording" on page 53.
• To use the VPS/PDC function, set VPS/PDC to ON. For details about the
VPS/PDC function, see "Timer recording with VPS/PDC signals" on
page 53.
• To change the setting, press MENU, and highlight LIST, then select
TIMER LIST and press OK. Then enter the new timer setting and press
OK.
If the information is not correct, press CLEAR to cancel the settings.
Press MENU to exit the menu.
TIMER
2 8 . 9
DATE
TIME
PROG.
TODAY
2 0 : 0 0 2 1 : 0 0
A
SP / LP
SP
VPS / PDC
OFF
LIST
SELECT :
SET
:
CANCEL
:
CLEAR
EXIT :
TIMER
2 8 . 9
DATE
TIME
PROG.
TODAY
2 0 : 0 0 2 1 : 0 0
A
SP / LP
SP
VPS / PDC
OFF
LIST
SELECT :
SET
:
CANCEL
:
CLEAR
EXIT :
THU
AB
MENU
THU
AB
MENU
Advertisement
Table of Contents
