Table of Contents
Advertisement
If you have connected your VCR to the TV with a Scart
(EURO-AV) connector and an aerial cable as well
In order to avoid any interferences with existing broadcasts, we recom-
mend you to set RF channel to the OFF position.
1
Turn on your TV and press ?/1 (on/standby) to turn on the VCR.
•
Pull down the drop down panel.
2
Press briefly RF CHANNEL on the VCR.
AUTO SET UP
The factory-preset RF (Radio Frequency) channel appears in the display
window.
RF CHANNEL
3
Press PROGRAM +/- until the OFF indication appears in the display
- PROGRAM +
window. The RF channel is then switched off.
TRACKING
The picture shown below appears clearly on the TV screen (background
must be green).
4
Press RF CHANNEL again.
AUTO SET UP
You can now set your VCR with the Auto Set Up function (see page 18).
RF CHANNEL
Note
• If in step 3 the green screen does not appear, select the "AV/EXTERNAL" source on your TV
(please refer to your TV instruction manual).
RF CHANNEL
g
PROGRAM +/–
AUTO SET UP
VPS
PDC
EDIT
AUTO SET UP
VPS
PDC
EDIT
SMARTLINK
SP
EP
OPC
LP
VIDEO
M
H
SMARTLINK
SP
EP
OPC
LP
VIDEO
H
M
SONY VIDEO CASSETTE RECORDER
Tuning your TV to the VCR
STEREO
TV
NICAM
S
STEREO
TV
NICAM
S
17
Advertisement
Table of Contents
