Table of Contents
Advertisement
Connection to your TV and Set-Top Box (STB)
If you don't use a STB, skip to page 15.
If your STB has a Scart (EURO-AV) connector
The illustration below shows an example of connecting the STB to LINE-3 IN.In this case, set
the STB CONNECTION setting to LINE-3 (see page 23).
Scart cable (supplied with
the STB)
iLINE-
1 (TV)
: Signal flow
You can watch programmes from the Set-Top Box connected to this VCR on your TV even
when the VCR is turned off using the Line Through function. When you turn on the STB, this
VCR automatically sends the signal from the STB to the TV without turning itself on.
1
Connect the STB to the LINE-3IN connector as shown above.
2
Set POWER SAVE to OFF in the OTHER OPTIONS menu.
3
Turn off the VCR.
To watch a programme from the STB, turn on the STB and the TV.
For details, see page 23.
Note
• You cannot watch programmes from your STB on the TV while recording unless you record
a programme from your STB.
STB Control
AERIAL
IN
tLINE
- 3 IN
AERIAL
OUT
Aerial cable (supplied)
Scart cable (not supplied)
STB controller
Side view
(supplied)
STB
AERIAL IN
Scart
(EURO-AV)
continued
Connecting the VCR
13
Advertisement
Table of Contents
