System - Sony SLV-SE700G Operating Instructions Manual

Example C
Your VCR (Recorder)
: Signal flow
How to connect to a stereo system
(SLV-SE800G and SE800I only)
Connect the LINE-2 IN AUDIO L/R jacks on this VCR to the audio output jacks on
the stereo system, using the RK-C510HG audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.*
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select
the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-2106HG cable
instead and connect the cable to the line out jacks of the other VCR.
1
* SLV-SE800G and SE800I only
* 2 SLV-SE700G and SE700I only
t LINE-3 IN*
1
or
t LINE-2 IN*
2
VMC-2121HG Scart cable (not supplied)
Connecting to a VCR or stereo system
TV
Other VCR (Player)
Scart
(EURO-AV)
1
75