Slv-Se800G And Se800I Only - Sony SLV-SE700G Operating Instructions Manual

Recording programmes using
the Synchronized Recording
function
Before you start...
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
SYNCHRO REC
1
Press INPUT SELECT or PROG +/– to display "L3" in the display window.
2
Set the timer on the connected equipment to the time of the programme you want
to record, then turn it off.
3
Press SP/LP to select the tape speed.
4
Hold down SYNCHRO REC for more than two seconds.
The SYNCHRO REC button lights up and the VCR stands by for recording.
The VCR automatically turns on and starts recording when it receives an input
signal from the connected equipment.
The VCR automatically stops recording when the tape reaches the end or when
the connected equipment stops transmitting an input signal.
To cancel the Synchronized Recording function
Press SYNCHRO REC. The SYNCHRO REC button turns off.
To stop recording
Press x STOP while recording.
60
Synchronized Recording (SLV-SE800G and SE800I only)
1 2 3
4 5 6
7 8 9
0
SP/LP
INPUT
SELECT
PROG +/–