Step 4 : Setting Up The Vcr With The Auto Set Up Function - Sony SLV-SE700G Operating Instructions Manual

Step 4 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function. With this function, you can set the TV channels, guide channels for the
VIDEO Plus+ system, and VCR clock automatically.
Hold down AUTO SET UP on the VCR for more than three seconds.
AUTO
SET UP
The VCR automatically turns on and starts searching for all of the
receivable channels and presets them in the appropriate order for your local
area.
RF CHANNEL
If you want to change the order of the channels or disable unwanted
programme positions, see "Changing/disabling programme positions" on
page 23.
If you use the SMARTLINK connection, the Preset Download function
starts and the SMARTLINK indicator flashes in the display window during
download.
After the search or download is complete, the current time appears in the
display window for any stations that transmit a time signal. If the time does
not appear, set the clock manually (see page 29).
To cancel the Auto Set Up function
Press AUTO SET UP.
Notes
• Do not cancel the Auto Set Up function. If you do, repeat the step above.
• Whenever you operate the Auto Set Up function, some of the settings (VIDEO Plus+, timer,
etc.) will be reset. If this happens, you have to set them again.
AUTO SET UP
Setting up the VCR with the Auto Set Up function
13