Table of Contents
Advertisement
Available languages
Available languages
© Tape counter and reset button
@ TRACKING control
TRACKING
® Audio level control section
AUDIO
LEVEL -——
cH
oi
a
ra
5
23
5
2
@
or
1
=
sume:
%
J
%.
LIMITER
>
=
2
a
ie)
4
:
© Audio monitor section
HEADPHONES
—— AULIO
x
MONITOR
™~
Ss
@ MIC jacks (phone jacks)
MIC
@e
© SYSTEM SELECT switch
SYSTEM
SELECT
MIS
o»
Bo
seca
|
a)
Before recording, set the tape counter to "000" by pressing the reset button.
The
counter
number
will advance
with
the forward
tape
motion.
Program
material can be referenced to counter readings to locate particular segments.
Turn to minimize
the tracking variance
between
machines
so that the best
possible picture is obtained.
Normally, set this control to the center FIXED position.
ose AUDIO LEVEL meters
These meters indicate the audio recording level during recording and the audio
playback level during playback.
_.- AUDIO LEVEL controls
These controls adjust the audio recording level of the channel 1 or 2 separately.
Turn the controls so that the meter pointers swing up to "O" at their maximum
deflection.
_-~ AUDIO LIMITER switch
Set the switch to ON when recording a program which contains peaks such as
live recording. The audio limiter circuitry will be activated to minimize audio
distortion at the peaks. For normal
recording and when adjusting the audio
recording level, set the switch to OFF.
, AUDIO MONITOR switch
" This switch
selects the monitoring
sound
through a video monitor or head-
phones.
CH-1:
To hear the sound recorded on channel 1 only.
MIX:
To hear the channel 1 sound from the left headphone and the channel 2
sound from the right headphone or to hear the mixed sound of the channel 1
and channel 2 through the video monitor connected to the AUDIO MONITOR
jack or TV connector.
CH-2:
To hear the sound recorded on channel 2 only.
e This switch does not affect the audio outputs of the LINE OUT jacks.
'. HEADPHONES LEVEL control
This control adjusts the volume at the headphones.
~S HEADPHONES jack (stereo phone jack)
For microphone
recording, connect
microphones
with phone plugs here. The
CH-1
jack
is for the
left microphone
and
the CH-2
jack is for the
right
microphone. When a microphone is connected, the corresponding LINE IN jack
will be automatically cut off.
To connect microphones with mini plugs, use the optional PC-2A plug adaptors.
Selects the video signal system.
NTSC:
For playback
of a video cassette
recorded
using the EIA standard
NTSCz.43 color system.
PAL:
For recording and playback of a video cassette recorded using the CCIR
standard PAL color system.
SECAM:
For recording and playback of a video cassette recorded using the
CCIR standard SECAM color system.
Advertisement
Table of Contents
