ReSound LINX Quattro User Manual page 27

6. Gently pull the new filter out of the dial.
7. Align the new filter to the sound outlet.
8. Press the new filter into the opening, and simultaneously pull and rock back and forth until
the new wax filter is in place.
Change Cerustop (white) wax filters
1. To remove the old wax guard, insert the removal side of the wax guard tool into the used
wax guard so that the shaft of the tool is touching the rim of the wax guard. Slowly pull the
wax guard straight out.
2. To insert the new wax guard, gently press the replacement side of the wax guard tool
straight into the hole of the sound outlet until the outer ring lies flush with the outside of the
receiver. Pull the tool straight out - the new wax guard will remain in place.
NOTE: Pressing on the new filter with the flat side of the wax filter tool can ensure that the
filter is correctly in place.
NOTE: If a different type of wax filter is used for your hearing aids, or if your hearing aids do
not use wax filters, consult your hearing care professional for guidance.
CAUTION: Use only original consumables from the manufacturer e.g. wax filters.
27