Advertisement
2
VALVE ASSEMBLY
• Remove PLASTER GUARDS.
• Thread INSERT (1) into SIDE VALVE (2) until it touches the
installation surface.
• Thread INSERT (3) into SIDE VALVE (4) until it touches the
installation surface.
• Tighten COUPLING (5) into TEE (6) for products without
hand shower.
3
INSTALL HANDLES
• Turn VALVE to OFF position.
• Push ADAPTER (1) on VALVE STEM (2), so that the hole of the ADAPTER (1) without a spline is facing up. Fig. A.
Tighten STEM SCREW (3) to secure ADAPTER (1).
• Align DECK ADAPTER (5) to LEVER HANDLE ASSEMBLY (4). Push LEVER HANDLE
ASSEMBLY (4) onto DECK ADAPTER (5) firmly to flush against mounting surface.
Fig. A.
SPLINE END DOWN
FITTING
MOUNTING
DECK
VALVE
LOCKING
HOT
FEMALE TEETH
TOP
3
MALE TEETH
- 2 -
1
SPOUT
SHANK
2
4
1
2
5
3
VALVE
LOCKING
COLD
4
6
5
M965953 (8/18)
Advertisement
