Advertisement
Step 5
After the connection between your iOS device and FlashAir is established, tap the app icon to
open the app.
Step 6
When the Setup screen appears, enter the network name you want to see in the list of networks
into the SSID field and the new password of the FlashAir into the Password field. The SSID can
be up to 32 alphanumeric characters. Choose a password between 8 and 63 alphanumeric
characters. Note that alphabetical characters are case-sensitive. Do not use a password that
could be easily guessed by somebody else, or a very simple password. We recommend you
make a note of your SSID and password.
Tap "Set". The right screen in the following figures will be displayed. Then remove the FlashAir
from the device and insert it again. After that, turn on the device again.
Advertisement
