Advertisement
After reboot, connect to the FlashAir again by selecting changed SSID in the same way to Step
3. Enter the changed password for your FlashAir and tap "OK", if required.
This completes your initial settings.
1-3. Setting up the FlashAir using Web browser
Step 1
Insert the FlashAir into a device (e.g. digital still camera) which is compatible with the card
capacity and the card type. Turn on the device.
● Within 5 minutes after turning on the device, complete Step2 and Step3. Without any connection from a
Wi-Fi device within 5 minutes, wireless LAN functionality of the FlashAir automatically turns off. If the
wireless LAN functionality turns off, turn on the device in which the FlashAir is inserted, and then turn on
the device again.
● When the device in which the FlashAir is inserted is turned off, the wireless LAN functionality of the FlashAir
also turns off. Extend the automatic power off time of the device to the longest period possible before doing
initial settings.
Advertisement
