Advertisement
make a note of your SSID and password.
Tap "Set". The right screen in the following figures will be displayed. Then remove the FlashAir
from the device and insert it again. After that, turn on the device again.
After reboot, the app connects to the FlashAir again automatically.
This completes your initial settings.
1-2. Setting up the FlashAir using FlashAir App for iOS
Step 1
Install the FlashAir App for iOS. You can find it by searching "FlashAir" on App Store.
Step 2
Insert the FlashAir into a device (e.g. digital still camera) which is compatible with the card
capacity and the card type. Turn on the device.
Advertisement
