Power Supply Connections - Optical Systems Design OSD2512 Quick Start Manual

4 Power Supply Connections

Connect the dual redundant power to the 4-way terminal block located on the rear of the unit.
The OSD2512 requires external +10 to +36V
External Power Pin
PAGE 6
OPTICAL SYSTEMS DESIGN
@ 40VA Max power.
DC
FIGURE 3: POWER CONNECTION
TABLE 1: DC POWER CONNECTION
Pin 1, Pin 3
Pin 2, Pin 4
OSD2512 QUICK START GUIDE
Specification
0V (Ground Isolated)
+10 to +36V @ 40VA max
DC
DOC ID: 10116701