Editing; Connecting To A Vcr Or Stereo System - Sony PAL NTSC 4.43 SLV-SE80UX Operating Instructions Manual

Editing

Connecting to a VCR or stereo system

How to connect to record on this VCR
LINE-2 IN
VMC-820HG audio/video cable (not supplied)
Tip
• You can also use the LINE-1 (TV) connector instead.
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
• If the other VCR does not have a EURO-AV (Scart) connector, use the VMC-2106HG
cable instead and connect the cable to the line out jacks of the other VCR.
How to connect to a stereo system
Connect the LINE-2 IN AUDIO L/R jacks on this VCR to the audio output
jacks on the stereo system, using the RK-C510HG audio cable (not supplied).
68
Editing
This VCR (Recorder)
This VCR (Recorder)
... LINE-3 IN
VMC-2121HG EURO-AV cable (not supplied)
: Signal flow
TV
LINE OUT
Other VCR (Player)
TV
Other VCR (Player)
EURO-AV
(Scart)