Setting The Recording Duration Time - Sony PAL NTSC 4.43 SLV-SE80UX Operating Instructions Manual

Setting the
recording
duration time
After starting recording in the normal
way, you can have the VCR stop
recording automatically after a specified
duration.
1
While recording, press r REC.
The
2
Press r REC repeatedly to set the duration.
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR
stops recording and turns off automatically.
To extend the duration
Press r REC repeatedly to set a new duration.
To cancel the duration
Press r REC repeatedly until the
returns to normal recording mode.
To stop recording
To stop the VCR while recording, press p STOP.
Note
• You cannot display the current tape time in the display window when setting the
recording duration.
54
Additional Operations
indicator appears in the display window.
0:30 1:00
SP VIDEO
5:30 6:00
indicator disappears and the VCR
r REC
OPC
Normal recording