Sony PAL NTSC 4.43 SLV-SE80UX Operating Instructions Manual page 53

7
Press DIAL TIMER to complete the setting.
"OK" appears in the display window for about five seconds.
The indicator appears in the display window and the VCR stands by
for recording.
To stop recording
To stop the VCR while recording, press p STOP.
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press I/u. The
indicator turns off and the VCR switches on. Remember to press I/u to
reset the VCR after using the VCR.
Tips
• The programme is recorded in the current tape speed mode. To change the tape
speed, press SP/LP before you complete the setting in step 7.
• To check, change, or cancel the programme setting, see "Checking/changing/
cancelling timer settings" (page 55).
Notes
• The indicator flashes in the display window when you complete the setting in
step 7 with no tape inserted.
• If eight programmes have already been set, "FULL" appears in the display window
for about three seconds in step 1.
Additional Operations
53