Sony PAL NTSC 4.43 SLV-SE80UX Operating Instructions Manual page 12

Step 3 : Connecting the VCR (continued)
If your TV does not have a EURO-AV (Scart)
connector
Mains lead
to mains
: Signal flow
1
2
3
Note
• When you connect the VCR and your TV only with an aerial cable, you have to set
RF MODULATOR in the OPTIONS-2 menu to ON (initial setting) (see page 67).
12
Getting Started
Aerial cable (supplied)
Disconnect the aerial cable from your
TV and connect it to AERIAL IN on the
rear panel of the VCR.
Connect AERIAL OUT of the VCR and
the aerial input of your TV using the
supplied aerial cable.
Connect the mains lead to the mains.
If the mains plug does not fit in the mains, use the supplied plug
adapter.
AERIAL IN
AERIAL OUT
AERIAL IN
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE