Fitting The Probe - Elcometer 456 Operating Instructions Manual

1.1 What the box contains
• Elcometer 456 Blanket Probe
• 3 x Foils : 500µm, 1000µm and 2mm
• Operating instructions

2 FITTING THE PROBE

To ensure correct transfer of data from the probe and detection of the new probe, the gauge must
be switched off when the Blanket Probe is fitted.
To fit the probe
Align connector keyway and push in direction shown.
The connector locks automatically.
Note: The design of the probe connector allows some movement between the probe and the
gauge. This is intentional and does not affect measurement performance.
3