Maintenance; Technical Data - Elcometer 456 Operating Instructions Manual

Blanket probe

Hide thumbs Also See for 456:

Readings data can be automatically transferrred to an Excel spreadsheet and analysed graphically. This

quickly shows trends in blanket wear and allows prediction of when the blanket should be adjusted or

replaced.

This software may be downloaded from the Elcometer website www.elcometer.com

Consult your Elcometer 456 operating instructions for details of connecting the gauge and using the

software.

6 MAINTENANCE

The Elcometer Blanket Probe does not contain any user-serviceable components. In the unlikely event of

a fault, the probe should be returned to your local Elcometer supplier or directly to Elcometer.

Details of Elcometer offices around the world are given on the outside cover of these Operating Instructions.

Alternatively visit the Elcometer website at www.elcometer.com

Minimum substrate thickness

Maximum surface temperature measurable

Range

Accuracy

Whichever is the greater. The lower value is achieved when calibrated close to the thickness to be measured.

300 µm (12 mils)

150° C (300° F)

0 mm to 5.0 mm

(0 mil to 200 mil)

±1% to ±3%

or ±0.02 mm (1 mil)

Table of Contents