Specifications; Technical Drawing - Martin Audio SX110 User Manual

SXF115

Specifications

TYPE Compact, single driver, direct radiating subwoofer
FREQUENCY RESPONSE 50Hz-150Hz ± 3dB, -10dB @ 42Hz
DRIVER 1 x 15" (300mm)/4" (100mm) voice coil, ultra-long excursion, ferrite magnet
RATED POWER 800W AES, 3200W peak
RECOMMENDED AMPLIFIER iK42/81
SENSITIVITY 103dB
MAXIMUM SPL 136dB continuous
NOMINAL IMPEDANCE 8 ohms
DISPERSION (-6dB) Omnidirectional
CROSSOVER 80-120Hz active
ENCLOSURE Multi-laminate birch plywood
FINISH Textured PU coating
PROTECTIVE GRILLE Perforated steel
CONNECTORS 2 x NL4
PIN CONNECTIONS (INPUT) +1, -1 (+2, -2 link through)
PIN CONNECTIONS (LINK) +1, -1 (+2, -2 link through)
FITTINGS Two skids on base, matching channels on top
M20 top-mounted thread plate for pole mounting
Integral flyware for suspension of up to four SXF115
Large bar handle on each side
Two front-mounting latch plates for wheelboard
DIMENSIONS (INCL FEET) (W) 500mm x (H) 510mm x (D) 575mm (725mm incl wheelboard)
(W) 19.7in x (H) 20.1in x (D) 22.6in (28.5in incl wheelboard)
WEIGHT 45kg (99lbs)
52kg (115lbs) incl wheelboard

Technical Drawing

Copyright © 2019 Martin Audio Ltd.
26
SX SERIES USER GUIDE
SX SERIES USER GUIDE V1.0