Sxp118; Introduction; Accessories - Martin Audio SX110 User Manual

SXP118

SXP118

Introduction

The SXP118 is a compact, high-performance subwoofer that extends the low frequency operating range of a CDD-LIVE full-range system
to 40Hz — providing exceptional low frequency impact and increasing headroom. It features a long-excursion 18" (460mm)/4" (100 mm)
voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure.
The design of the 18" driver maximises output while minimising power compression and distortion, and the four reflex ports have a large
frontal area to reduce turbulent air noise at very high levels. With a maximum SPL capability of 135dB peak at 1 metre, the SXP118 is
the ideal subwoofer for theatre and portable live sound applications, as well as premium installations that require the maximum output
from a compact enclosure.
A self-powered system, the SXP118 incorporates a Class D amplifier, DSP and Dante™ digital audio networking — simplifying set-up,
enhancing control and eliminating amplifier racks. The onboard amplifier delivers 2000W peak output to the driver, and its switched-mode
power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz. DSP functions — including parametric EQ, delay, muting,
gain and preset selection — can be controlled over Ethernet from a PC or Windows® tablet via intuitive VU-NET™ proprietary software.

Accessories

M10 eyebolts HTK00004
Transit cover CDDLTC118
Castor kit WHEELKIT
Wind-up pole ASF20071
Weather kit CDDLRK118/218
Copyright © 2019 Martin Audio Ltd.
59
SX SERIES USER GUIDE
SX SERIES USER GUIDE V1.0