1. Manuals
  2. Brands
  3. NI Manuals
  4. I/O Systems
  5. C Series
  6. Calibration procedure

NI C Series Calibration Procedure

8-channel current output module
Hide thumbs Also See for C Series:
Table of Contents

Advertisement

Quick Links

Download this manual
CALIBRATION PROCEDURE
NI 9266
8-Channel C Series Current Output Module
This document contains the verification and adjustment procedures for the NI 9266. For more
information on calibration solutions, visit ni.com/calibration.

Software

Calibrating the NI 9266 requires the installation of NI-DAQmx 18.1 or later on the calibration
system.
You can download NI-DAQmx from ni.com/downloads. NI-DAQmx supports LabVIEW,
™
LabWindows
/CVI
install support for the application software that you intend to use.

Documentation

Consult the following documents for information about the NI 9266, NI-DAQmx, and your
application software. All documents are available on
software.
NI cDAQ-9174/9178 USB Chassis Quick Start
NI-DAQmx installation and hardware setup
NI 9266 Getting Started Guide
NI 9266 connection information
NI 9266 Datasheet
NI 9266 circuitry and specifications
NI-DAQmx Readme
Operating system and application software support in NI-DAQmx
LabVIEW Help
LabVIEW programming concepts and reference information about NI-DAQmx VIs
and functions
™
, ANSI C, and .NET. When you install NI-DAQmx, you only need to
ni.com
and help files install with the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NI C Series

Summary of Contents for NI C Series

  • Page 1 This document contains the verification and adjustment procedures for the NI 9266. For more information on calibration solutions, visit ni.com/calibration. Software Calibrating the NI 9266 requires the installation of NI-DAQmx 18.1 or later on the calibration system. You can download NI-DAQmx from ni.com/downloads. NI-DAQmx supports LabVIEW, ™...
  • Page 2 C enum to .NET enum mapping table Test Equipment NI recommends that you use equipment in the following table for calibrating the NI 9266. If the recommended equipment is not available, select a substitute from the requirements column.
  • Page 3 Complete the following procedure to determine the As-Found status of the NI 9266. Set the DMM to Standby mode (STBY) and disable the output of the bench-top power supply. Connect the NI 9266 to the bench-top power supply and the DMM as shown in the following figure. Figure 1. Current Accuracy Connections...
  • Page 4 None Start the task. Generate a current output test point by writing a single sample according to the following table. Table 2. NI 9266 Test Limits and Output Data Configuration for Current Accuracy Verification Test Point Value 1-Year Limits Samples Per...
  • Page 5 Input the external temperature in degrees Celsius. Call the NI 9266 get C Series adjustment points function to obtain an array of recommended calibration currents for the NI 9266. Connect the DMM and the bench-top power supply to the NI 9266 as shown in the Current Accuracy Connections figure.
  • Page 6 . You can find patents.txt ni.com/patents information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at for the NI global trade compliance policy and how ni.com/legal/export-compliance...

This manual is also suitable for:

C 9266

Table of Contents