NI C Series Getting Started
Hide thumbs
Also See for C Series:
- User manual and specifications (41 pages) ,
- Getting started (33 pages) ,
- Getting started manual (27 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NI C Series
Summary of Contents for NI C Series
- Page 1 NI-9228 Getting Started 2024-01-16...
- Page 2 NI-9228 Getting Started........
- Page 3 NI-9228 Getting Started NI-9228 Getting Started NI-9228 Block Diagram Overvoltage Protection AI– Amplifier NI 9228 Input signals on each channel are conditioned, buffered, and then sampled ■ by an ADC. Each AI channel provides an independent signal path and ADC, enabling ■...
- Page 4 NI-9228. High-Vibration Application Connections If your application is subject to high vibration, NI recommends that you follow these guidelines to protect connections to the NI-9228: Use ferrules to terminate wires to the detachable connector.
- Page 5 When connecting all 16 terminals using the cable retainer, the total maximum wire diameter including insulation must not exceed 1.6 mm (0.06 in.) per wire in order to fit under the 7.6 mm (0.30 in.) clearance of the NI-9939 cable retainer. Figure 1. NI 9939 Wire Clearance Dimensions 11 mm (0.43 in.)
- Page 6 16-Position Screw Terminal Connector (2) and tighten the screw. Make sure no exposed wire extends past the screw terminal. 2. Route the wire through the NI-9939 opening and remove slack from the wiring. 3. Install the Backshell Top Enclosure (1) to the Backshell Bottom Enclosure (3).
- Page 7 16-Position Screw Terminal Connector (2) and tighten the screw. Make sure no exposed wire extends past the screw terminal. 2. Route the wire through the NI-9939 opening, remove slack from the wiring, and secure wires using the Cable Retainer (6) and tighten the Screws (7).
Need help?
Do you have a question about the C Series and is the answer not in the manual?
Questions and answers