System Audio Control - Sony 3-877-030-12(1) Operating Instructions Manual

Using the Volume Limit
function
When the System Audio Control function is
active, and the output method changes from the
TV speaker to the system speaker automatically,
loud sound may be output depending on the
volume level of the system. You can prevent this
by limiting the maximum volume level.
1
Press AMP MENU.
2
x/X
Press repeatedly until "SET HDMI"
appears, then press
3
x/X
Press repeatedly until "VOL LIMIT"
appears, then press
4
x/X
Press to select the maximum
volume level you want.
The maximum volume level changes as
follows:
MAX y 49 y 48.....2 y 1 y MIN
5
Press AMP MENU.
The AMP menu turns off.
Notes
• This function is available only when the Control for
HDMI function is set to on.
• This function is not available when the output method
changes from the system speaker to the TV speaker.
Tips
• We recommend that you set the maximum volume
level to a little lower than the volume you usually
listen to.
• Regardless of the maximum volume level you set, the
VOLUME +/– buttons of the system and the remote
are operable.
• If you do not want to limit the maximum volume
level, select "MAX."
Using the INPUT SELECTOR
buttons of the remote
The INPUT SELECTOR buttons (TV, BD,
DVD, SAT) work as follows when the Control
for HDMI function is set to on.
• BD, DVD, SAT: The system's audio input is
• TV: The system's audio input is switched to the
or c.
or c.
switched to the corresponding component's
sound by pressing the button. The TV's video
input is also switched to the component's image
automatically.
TV sound by pressing this button. The TV's
video input is not switched automatically.
Select the TV channel you want to watch with
the TV remote.
25
GB