Getting Started
Supplied accessories
Please check the following accessories in the
package.
Optical cable (1.5 m) (1)
Remote commander (RM-ANU041) (1)
Size AA (R6) batteries (2)
Support belt and two screws (small/large)
(1)
Shelf board (1)
Shelf support pins (4)
Operating Instructions (1)
8
GB
Inserting batteries into the
remote
You can control the stand using the supplied
remote. Insert two size AA (R6) batteries by
matching the + and – ends on the batteries to the
markings inside the compartment.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from
the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an extended
period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.