(One-Touch Play) Enjoying The Tv Sound From The Stand; System Audio Control - Sony RHT-G950 Operating Instructions Manual

Enjoying the TV sound
from the stand

(System Audio Control)

You can enjoy the TV sound from the speakers
of the stand by means of a simple operation. For
details, see the operating instructions of the TV.
C, X, x, c,
RETURN
PRESET
TUNING
Press ?/1 to turn on the stand.
The sound is output from the speaker of the
stand. The sound is output from the TV's speaker
when you turn the stand off.
Notes
• When the TV is turned on before this stand is turned
on, the TV sound will not be output for a moment.
• When you connect a TV that does not have System
Audio Control function, the System Audio Control
function does not work.
Tip
• You can adjust the volume and turn off the sound of
the stand using the TV remote.
34
GB
Downloaded From TheatreSystem-Manual.com Manuals
INPUT SELECTOR
CENTER SUBWOOFER
LEVEL
DISPLAY AMP MENU
MENU
- +
NIGHT DIMMER PRESET
- +
TUNING
MUTING
VOLUME SOUND FIELD
Using the Volume Limit
function
When the System Audio Control function is
active, and the output method changes from the
TV speaker to the stand speaker automatically,
loud sound may be output depending on the
volume level of the stand. You can prevent this
by limiting the maximum volume level.
1
Press AMP MENU.
2
?/1
Press
appears, then press
3
Press
AMP
appears, then press
MENU
4
Press
volume level you want.
The maximum volume level changes as
follows:
MAX y 49 y 48 ..... 2 y 1 y MIN
5
Press AMP MENU.
The AMP menu turns off.
Notes
• This function is available only when the Control for
HDMI function is set to on.
• This function is not available when the output method
changes from the stand speaker to the TV speaker.
Tips
• We recommend that you set the maximum volume
level to a little lower than the volume you usually
listen to.
• Regardless of the maximum volume level you set, the
VOLUME +/– button of the stand and the remote is
operable.
• If you do not want to limit the maximum volume
level, select "MAX."
X/x
repeatedly until "SET HDMI"
or c.
X/x
repeatedly until "VOL LIMIT"
or c.
X/x
to select the maximum