Sony 3-877-030-12(1) Operating Instructions Manual page 34

There is no picture on the TV screen.
• Check that the TV is selected correctly.
• Set the TV to the appropriate input mode.
Control for HDMI
The Control for HDMI function does not work.
• Check the HDMI connection (page 10).
• Make sure "CTRL: HDMI" is set to "ON" in
AMP menu.
• Make sure the connected component is
compatible with the Control for HDMI
function.
• Check the Control for HDMI settings on the
connected component. Refer to the
operating instructions supplied with the
connected component.
• If you change the HDMI connection, or
connect/disconnect the AC power cord
(main lead), or if there is a power failure,
repeat the procedures of "Preparing for the
"BRAVIA" Sync" (page 21).
• The system may not work correctly if you
select a component that is not compatible
with the Control for HDMI function on the
TV side.
• Make sure "DVD CTRL", "SAT CTRL" or
"DMPORT. CTRL" is set to "ON" in AMP
menu. If the system input is selected for a
component whose "DVD CTRL," "SAT
CTRL" or "DMPORT. CTRL" setting is
"OFF," the Control for HDMI functions,
such as One-Touch Play, System Audio
Control, Volume Limit function, will not
work, even if the Control for HDMI function
setting of another component is set to on.
No sound is output from the system and the
TV's speaker.
• Check the volume of the system and the TV.
• Select the input of the system correctly.
34
GB
The sound is output from both the system and
the TV.
• If the Control for HDMI function is set to
off, or the selected component is not
compatible with the Control for HDMI
function, turn off the sound of the system or
the TV.
The System Power Off function does not work.
• Change the setting of the TV to turn
connected components off automatically
when you turn off the TV. For details, refer
to the operating instructions of the TV.
An image does not appear on the TV.
• Check whether HDMI IN and HDMI OUT
are connected correctly.
A message stating that the output method has
changed from the system speaker to the TV
speaker appears on the TV screen.
• The Control for HDMI function for the
selected component is set to off. For details,
refer to "Setting the Control for HDMI
function to off for a component without
HDMI jacks" (page 23).
Other
The remote does not function.
• Point the remote at the remote sensor
the system.
• Remove any obstacles in the path between
the remote and the satellite speaker.
• Replace both batteries in the remote with
new ones, if they are weak.
• Make sure you select the correct input on the
remote.
The volume turns down when the output
method changes from the TV speaker to the
system speaker.
• The Volume Limit function is working. For
details, refer to "Using the Volume Limit
function" (page 25).
on