RKC INSTRUMENT SA100 General Description Manual

SA100
General Description
The SA100 is a socket mounting type temperature controller and is available for mounting inside panel by easily mounting on DIN rail. The
SA100 has features such as analog retransmission output, advanced self-tuning, alarms, digital communications for networking and digital
contact for SV1/SV2 or RUN/STOP functions..

Features

Simple mounting on DIN Rail
Corresponding to various applications
Analog retransmission output
Digital communications
Advanced self-tuning
Simple Mounting on DIN Rail
The SA100 can be simply mounted on DIN rail with DIN rail
mounting socket. The maintenance is also simple, as the unit
can be removed from socket.
PV
SV
AT
OU T1
OU T2
SV 2
AL M
1
SE T AL M
2
R/ S
SA 10
0
• The rear terminal socket allows the unit to be mounted
on a panel board.
PV
SV AT
OU T1
OU T2
SV 2
ALM
1
SE T ALM
2
R/S
SA1
00
SA100_01E
Digital Temperature Controller
Corresponding to Various Applications
Two points of output can be used as control, alarm or analog
retransmission. The SA100 corresponds to various applications
such as temperature controller and overheat protection unit.
• As a temperature controller
1. Temperature alarm controller
PV PV
SV SV
SET SET R/S R/S
SA100 SA100
2.Temperature retransmitting controller
PV PV
SV SV
DIN rail mounting socket
SET SET R/S R/S
SA100 SA100
3.Heat/Cool temperature controller
PV PV
SV SV
SET SET R/S R/S
SA100 SA100
• The change of display for PV/SV can be configurable.
For the details of it, contact our sales office.
Analog Retransmission Output
An analog output is available so that the process value can be
retransmitted an analog signal to a remote instrument such as a
Rear terminal socket
recorder or data-logging equipment.
R
www.rkc-usa.com
Distributed By
SA100
• As a overheat protection unit
or alarm unit
1. Overheat protection unit
OUT1 OUT1
PV PV
AT AT Control output AT AT
OUT1 OUT1 OUT1 OUT1
OUT2 OUT2 OUT2 OUT2
SV2 SV2 SV2 SV2
SV SV
ALM1 ALM1 ALM1 ALM1
ALM2 ALM2 OUT2 ALM2 ALM2
* Setting to ON/OFF action by
Alarm output
specifying direct action.
SET SET R/S R/S
SA100 SA100
2. Overheat protection unit with transmitting
function
OUT1 OUT1
Retransmission PV PV
AT AT AT AT
OUT1 OUT1
OUT1 OUT1
output OUT2 OUT2
OUT2 OUT2
SV2 SV2 SV SV SV2 SV2
ALM1 ALM1 ALM1 ALM1
OUT2 OUT2
ALM2 ALM2 ALM2 ALM2
Control output
SET SET R/S R/S
SA100 SA100
3. Alarm unit
OUT1
OUT1
Heating output
PV PV
AT AT
AT AT
OUT1 OUT1
OUT1 OUT1
OUT2 OUT2
OUT2 OUT2
SV SV SV2 SV2
SV2 SV2
ALM1 ALM1 ALM1 ALM1 OUT2
OUT2
ALM2 ALM2
ALM2 ALM2
Cooling output
SET SET R/S R/S
SA100 SA100
PV PV
AT
AT
OUT1 OUT1
OUT2 OUT2
SV SV2 SV2
SV
ALM1
ALM1
ALM2 ALM2
SET R/S SET R/S
SA100 SA100
PV (measured value) SV (set value)
display only display only
The SV is displayed on PV display.
Parameters are displayed on SV
display.
PV PV
AT AT
OUT1 OUT1
OUT2 OUT2
SV SV SV2 SV2
ALM1 ALM1
ALM2 ALM2
Analog output
SET SET R/S R/S 4 to 20 mA DC or
SA100 SA100
0 to 20 mA DC
K
C
(800) 576 - 6308
Inc,
R
R
Control output
Retransmission output
Control output
* Setting to ON/OFF action by
specifying direct action.
Alarm output
Alarm output
(Optional)
100.0°C
1