Installation - AEG IAE84881XB User Manual

• Use the original packaging to store
the Food Sensor.
• If you replace the Food Sensor, store
the old one minimum 3 m away. The
old Food Sensor may influence the
functioning of the new one.
3.5 Care and cleaning
• Clean the appliance regularly to
prevent the deterioration of the
surface material.
• Deactivate the appliance and let it
cool down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.

4. INSTALLATION

WARNING!
Refer to Safety chapters.
4.1 Before the installation
Before you install the hob, write down
the information bellow from the rating
plate. The rating plate is on the bottom
of the hob.
Serial number ...........................
4.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.
4.3 Connection cable
• For a single phase or two phase
connection, use the cable type:
H05V2V2-F which withstands a
temperature of 90 °C or higher. Speak
to your local Service Centre.
• To replace the damaged mains cable,
use the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
3.6 Service
• To repair the appliance contact the
Authorised Service Centre.
• Use original spare parts only.
3.7 Disposal
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
higher. Speak to your local Service
Centre.
4.4 Assembly
min.
500mm
ENGLISH 7
min.
50mm