AEG IAE84881XB User Manual page 15

14 www.aeg.com
Heat setting
3 - 5
6
7 - 9
7.3 Using the cooking zones
Place the cookware in the centre of the
selected cooking zone. Induction
cooking zones adapt to the dimensions
of the bottom of the cookware
automatically.
Once you place a pot on the selected
cooking zone the hob automatically
detects it and the relevant slider appears
on the display. The slider is visible for 8
seconds, after that time the display goes
back to the main view. To close the slider
faster tap the screen outside of the slider
area.
When other zones are active the heat
setting for the zone you want to use may
be limited. Refer to "Power
Management".
Make sure that the pot is
suitable for induction hobs.
For more information on
cookware types refer to
"Hints and tips". Check the
size of the pot in "Technical
data".
7.4 Heat setting
1. Activate the hob.
2. Place the pot on the selected
cooking zone.
The slider for the active cooking zone
appears on the display and is active for 8
seconds.
3. Touch or slide your finger to set the
desired heat setting.
The symbol turns red and becomes
bigger.
The hob deacti-
vates after
5 hours
4 hours
1.5 hour
7.5 Bridge function
This function connects two cooking
zones and they operate as one with the
same heat setting.
You can use the function with large
cookware.
1. Place the cookware on two cooking
zones. The cookware must cover the
centres of both zones.
2. Touch to activate the function.
The zone symbol changes.
3. Set the heat setting.
The cookware must cover the centres of
both zones but not go beyond the area
marking.
To deactivate the function, touch
cooking zones operate independently.
7.6 PowerBoost
This function activates more power for
the appropriate induction cooking zone;
it depends on the cookware size. The
function can be activated only for a
limited period of time.
1. Touch the desired zone symbol first.
2. Touch or slide your finger to the
right to activate the function for the
chosen cooking zone.
The symbol turns red and becomes
bigger.
The function deactivates automatically.
To deactivate the function manually
. The