Home Entertainment System - Sony Cablevision DHG-M55CV Hardware Setup Instructions

Home Entertainment System

Connecting a
Hi-Fi TV, Hi-Fi VCR,
and an Audio/Video
Receiver
See the illustration on the next page for details.
1
Connect the coaxial cable from the wall outlet (Cablevision cable
network signal) to the Digital Network Receiver's
2
Connect the Digital Network Receiver's
jacks to the A/V Receiver's
3
Connect the Digital Network Receiver's
jacks to the VCR's
4
Connect the VCR's
jacks.
AUDIO/VIDEO IN
5
Connect the A/V receiver's
jack.
6
Connect one end of the AC power cord to the Digital Network
Receiver's AC IN jack, then connect the plug end to an AC outlet.
✍
If your components have S VIDEO jacks: For best picture quality, use an S VIDEO
connection instead of the yellow video cable on your combined A/V cable. Using an S
VIDEO cable, connect the Digital Network Receiver's VIDEO OUT jack to the TV's S
VIDEO IN jack. S VIDEO does not provide audio, so audio cables must still be connected
to provide sound.
If your A/V receiver has digital audio in jacks, you can experience superior audio by
connecting the Digital Network Receiver's digital audio out jack (COAXIAL or OPTICAL)
to your A/V receiver's digital audio in jacks.
Connecting the Digital Network Receiver
AUDIO/VIDEO IN
LINE OUT 2 (VCR) AUDIO /VIDEO
jacks.
AUDIO/VIDEO IN
jacks to the A/V Receiver's
AUDIO/VIDEO OUT
MONITOR OUT
jack.
CABLE IN
LINE OUT 1 (TV) AUDIO /VIDEO
jacks.
jack to the TV's
VIDEO IN
21